20 Big Blue Water Filter – Whats the Best Option in 2024

Okay, here’s a blog post about installing a 20 big blue water filter, written in the style you requested:

Alright, so the water at my place has been tasting kinda funky lately, and I started noticing some weird reddish stains in the sink. Didn’t take a genius to figure out I probably had some iron or something else nasty in my water. After doing some digging around, it seemed like a whole house filter was the way to go, and a lot of folks online were talking about these “Big Blue” filters. So, I decided to take the plunge and get myself a 20-inch Big Blue water filter.

First, I had to gather all the stuff I needed. I already had the filter housing, which is this big blue plastic thing. It is important to get the right filter cartridges, because you know what? If the cartridge is not good enough, your water will still be dirty. I did some research and found that the Pentair Pentek is a pretty good one. The RFFE20-BB is what I got, because it is for iron, you know what I mean? Some people recommend to change the housing after 10 years or so, but mine was brand new, so I did not worry about it. Oh, and you are gonna need mounting brackets, screws, and some basic plumbing tools. Make sure you got those things before you start, or else you’re gonna be making a lot of trips to the hardware store.

Next, I turned off the main water supply to the house. This is super important, unless you want a surprise shower! Then I had to figure out where to install it. It should install after the pressure tank. I found a good spot on the main water line coming into the house, right after the main shut-off valve. Make sure to choose a place that is easy to access, so you can change the filters easily in the future. Then, I mount the bracket to the wall with screws. Make sure it is secure and will not fall, man!

Then, here comes the fun part – cutting the pipe. I used a pipe cutter to cut out a section of the main water line where the filter housing was going to go. This part can be a little tricky, so I took my time and made sure to cut it straight. I connected the filter housing to the water line using some fittings and made sure everything was tight. It is better to double-check the connection, man, because you do not want any leaking!

• First, I put the filter cartridge into the housing. It is not hard at all.
• Second, I turned the water back on slowly and checked for leaks.
• Third, I ran the water for a few minutes to flush out any air or loose stuff in the filter.

And that’s it! It took me a few hours, but it wasn’t too bad. Now, the water tastes way better, and those nasty stains are gone. Plus, I won’t have to worry about my appliances getting all messed up from the bad water. If you’re thinking about getting a whole house filter, I’d definitely recommend the Big Blue. It’s a solid choice, and it’s not too hard to install yourself if you’re a little bit handy. Just remember to change those filters every 6 to 12 months, like the pros recommend. Keep the water clean, folks!