400 gpd ro membrane: Is it worth it? Check this out before buying!

Hey guys, today I want to talk about something that’s been on my mind lately – reverse osmosis membranes, specifically the 400 GPD (gallons per day) ones. I’ve been doing some tinkering, and let me tell you, it’s been quite a journey.

So, a while back, I noticed the water at home just wasn’t up to par. You know, it had that weird taste, and I started worrying about what my family was actually drinking. That’s when I decided to dive into the world of water filters, and ultimately, reverse osmosis (RO) systems.

I started with a ton of research – reading articles, watching videos, the whole nine yards. I learned that a good RO system could make a huge difference. The heart of these systems? The RO membrane. That’s the thing that actually filters out all the nasties.

Now, when it comes to membranes, you’ve got different ratings based on how much water they can filter per day – that’s the GPD part. I saw a lot of folks using 50 GPD membranes, and those seemed okay, but I wanted something with more kick. That’s how I landed on the 400 GPD membrane. I figured, go big or go home, right?

Getting my hands on one of these was the first challenge. I ordered it online, along with a compatible membrane housing, a wrench, and some quick-connect fittings. I thought, “Why not just build my own RO system?” I like getting my hands dirty, so this seemed like a fun project.

The setup process was a bit of a learning curve, I won’t lie.

• First, I had to figure out how to install the membrane into the housing. It wasn’t rocket science, but you gotta make sure it’s snug and secure.
• Then came the fittings. These little guys connect the membrane housing to the rest of the water line. I had to make sure there were no leaks – that’s a big no-no.
• After that, I connected everything to my main water supply. This part was a bit nerve-wracking. I turned the water on slowly, checking for leaks every step of the way. Luckily, I had done a decent job, and there were no issues.

Once everything was set up, I let the system run for a while. The first few gallons were a bit slow, but that’s normal. You gotta flush the system out. After that, the water started flowing faster. I did a quick calculation – I was getting around 0.278 gallons per minute. Not bad, considering it’s a 400 GPD membrane.

Now, the big question – was it worth it? Absolutely! The difference in water quality is night and day. It tastes so much better, and I feel way better knowing my family is drinking clean water. Plus, I learned a ton about how these systems work. I even started recommending it to my friends – some of them have made the switch too!

One thing I learned is that these membranes don’t last forever. You gotta replace them every 2-3 years, or even sooner if your water is really bad. I’ve already marked my calendar for the next replacement. It’s a small price to pay for clean water, if you ask me.

So, that’s my story with the 400 GPD RO membrane. It’s been a fun, educational, and ultimately rewarding experience. If you’re thinking about upgrading your water filter system, I’d say give it a shot. You might be surprised at the difference it makes. Anyway, that’s all for now. Catch you guys later!