100 gpd ro membrane explained: Your easy guide to understanding reverse osmosis filtration!

Okay, guys, let’s talk about this 100 gpd RO membrane thing. I recently got my hands on one and wanted to share my whole experience with you, from start to finish.

So, picture this: I was looking to upgrade my old water filter. I heard about these RO membranes and how they’re supposed to be super good at cleaning water. I found this 100 gpd one, and I thought, “Why not give it a shot?” GPD stands for “gallons per day,” which means how much water this thing can process in 24 hours.

I got the membrane and started figuring out how to install it. First, I had to turn off the water supply to my old filter system. That was easy enough, just a twist of a valve. Then, I disconnected the old membrane housing. It was a bit tricky, but I managed to get it off without breaking anything.

Next, I took the new 100 gpd membrane and carefully put it inside the housing. It fit perfectly, which was a relief. I made sure everything was aligned correctly, then I reconnected the housing to the filter system. This part was just reversing what I did earlier, so it was pretty straightforward.

After everything was hooked up, I turned the water supply back on. I let the water run through the system for a while, like the instructions said, to flush out any residue or air. This took some time, but I wanted to make sure everything was working properly.

Now, here’s the fun part: testing the water. I took a glass and filled it with water from the new system. I took a sip, and man, the difference was noticeable! The water tasted so much cleaner and fresher. It was like night and day compared to my old filter.

• First thing I did: Turned off the water supply.
• Then: Disconnected the old membrane housing.
• Next up: Put the new 100 gpd membrane in.
• After that: Reconnected the housing.
• Finally: Turned the water back on and flushed the system.

I was pretty impressed with how much better the water tasted. It felt like I was drinking bottled water, but without the plastic waste. And knowing that this membrane can handle 100 gallons a day is pretty cool. I mean, that’s a lot of water!

From what I understand, this 100 gpd version is faster than the 50 gpd one. It pushes the water through quicker, which means you get more filtered water in the same amount of time. But, I also heard that because the water moves faster, it might not filter out every single tiny thing as well as the slower one. It’s a trade-off, I guess.

I also learned that RO, or reverse osmosis, is like the opposite of regular osmosis. It’s a bit of a mind-bender, but basically, it pushes water through a membrane to remove all the bad stuff. And the main difference between RO and NF is that RO gets rid of pretty much everything in the water. Pretty neat, right?

Final Thoughts

All in all, I’m really happy with this 100 gpd RO membrane. It was a bit of work to install, but the results are totally worth it. My water tastes amazing, and I feel good knowing that I’m drinking something that’s been thoroughly cleaned. If you’re thinking about upgrading your water filter, I’d say give this a try. It’s a game-changer!