How to Choose a 20 Inch RO Membrane: Buyers Guide!

Okay, so, I’ve been messing around with this whole water filter thing at home, and let me tell you, it’s been a journey. I decided to upgrade my reverse osmosis system – you know, the thing that makes tap water actually drinkable. The heart of the whole setup is this RO membrane, and I went for a 20-inch one this time. Let me walk you through what I did.

Getting Started

First off, I had to figure out what I actually needed. I mean, you can’t just slap any membrane in there and hope for the best. I did some digging around because, you know, our water here is pretty hard, and I wanted something that could handle that and still give me a decent amount of water each day. I heard that each person needs about 75 gallons of water a day, so for my family, I estimated we would need roughly 300 gallons daily.

Choosing the Right One

This is where it got a bit tricky. I knew I needed a 20-inch membrane, but there are a bunch of different types. Some are better for high flow rates, others are better at dealing with really hard water. I read up a bit on the basics of how these things work and what their performance is like in real-life situations.

The Installation

Alright, so I got the membrane. Now came the fun part – actually putting it in. It was a little bit of a tight fit, but I managed. I made sure everything was connected right, no leaks, you know the drill. This part wasn’t too bad, to be honest.

Testing it Out

After I got everything hooked up, it was time to see if this thing actually worked. I turned on the tap, and waited. It took a little while for the water to start coming through, but when it did, man, it was worth it. The water tasted so much better, it was a huge difference.

The Results

So, after using it for a while, I’m pretty happy with how it turned out. I’m getting plenty of clean water, and it tastes great. It was a bit of a hassle to set up, but honestly, it wasn’t as bad as I thought it would be.

If you’re thinking about upgrading your water filter system, just make sure you do your homework first. Figure out what kind of membrane you need, and don’t be afraid to get your hands dirty. It’s worth it in the end. At least, it has been for me. It allows for more flow. I think it is a wise decision for me.