Need Pure Water? Try 20 Big Blue Carbon Block Filter Today

Okay, so I recently got into this whole home water filtration thing, and let me tell you, it’s been quite the journey. I decided to go with a 20 big blue carbon block filter. I’d heard a lot about these and thought, why not give it a shot? I ordered the filter online, and man, was I excited when it arrived!

First things first, I had to get all the other stuff I needed. You know, like the housings, the wrench, some fittings, and some Teflon tape. I headed to the local hardware store and picked up everything, feeling like a real handyman, even though I had no clue what I was doing.

Once I got home, I laid everything out. The instructions looked simple enough, or so I thought. I started by wrapping the threads of the fittings with Teflon tape. I figured this would help prevent leaks. Then, I screwed the fittings into the filter housings. This part was a bit tricky, but I managed to get them in there pretty tight.

• Unpack the filter: I took that big blue carbon block filter out of its box and admired it for a second. It looked pretty serious.
• Insert into housing: Carefully, I placed the filter inside its housing. It fit snugly, which was a good sign.
• Tighten the housing: I used that big wrench to tighten the housing. I made sure it was nice and secure, not wanting any water spraying everywhere.

Next up was connecting the housings together. I had two of them, so I used a nipple connector to join them. Then, I had to mount the whole thing to the wall. I grabbed my drill, found some studs, and got to work. It was a bit of a struggle, but I got it up there eventually.

Finally, it was time to connect the filter system to my main water line. I turned off the water, cut the pipe, and started attaching the filter inlet and outlet using more fittings and some flexible tubing. This part was definitely the most nerve-wracking. I double-checked all the connections, making sure everything was tight and secure.

The Moment of Truth

With everything connected, I slowly turned the water back on, holding my breath. I watched closely for any leaks or drips. And guess what? No leaks! I couldn’t believe it. I actually did it. I let the water run through the filter for a few minutes, just like the instructions said, to flush out any loose carbon.

After that, I took a big glass of water and took a sip. The water tasted so much better! It was clean, crisp, and had no weird chlorine taste. I felt a huge sense of accomplishment. I had successfully installed my very own 20 big blue carbon block filter. It wasn’t the easiest thing I’ve ever done, but it was totally worth it. Now, my family and I can enjoy clean, filtered water straight from the tap. Pretty cool, right?

And there you have it! That’s my journey to better water with the 20 big blue carbon block filter. Now I’m just enjoying the fruits of my labor – one refreshing glass of water at a time.