One stop supplier of water treatment parts&accessories
Where to Buy Big Blue Charcoal Water Filter? Here is a Big Blue Charcoal Water Filter Comparison of Top Retailers and Their Prices!
So, the other day, I got this Big Blue charcoal water filter, and let me tell you, it’s been quite the experience setting it up. I’ve always been a bit paranoid about the quality of the water I drink, you know? I mean, you hear all sorts of things these days.
First off, I ordered the thing online. The website said it was a Kind Water Big Blue Filter. Sounded fancy, right? It arrived in a couple of days, packed nice and tight in a big box. I unpacked it and found this massive blue cylinder. It’s called “Big Blue” for a reason, I guess. It’s about 20 inches long and pretty hefty.
Starting installation
- First, I turned off the main water supply to my house. Safety first, as they say.
- Then, I found a good spot to install it. It needed to be somewhere along the main water line, after the main shut-off valve but before it splits off to different parts of the house.
- I measured and marked where the pipes needed to be cut. This was the point of no return, and to be honest, I was a bit nervous.
- With a pipe cutter, I made the cuts. Water started dripping out, so I had a bucket ready.
The filter housing, which is this big blue thing, came with mounting brackets. So, I drilled some holes and mounted it on the wall. It looked pretty solid up there. Next, I connected the pipes to the inlet and outlet of the filter housing. This part was a bit tricky, making sure everything was tight and leak-proof. I used some plumber’s tape and a wrench to secure the connections.
Inside the housing, there’s this cartridge with activated charcoal and some other stuff called KDF85. Apparently, KDF85 is good for removing chlorine and some other nasty things. The cartridge is supposed to last for about 25,000 gallons or six months, whichever comes first. I wrote down the date I installed it so I wouldn’t forget to replace it.
Once everything was connected, I slowly turned the main water supply back on. I was holding my breath, hoping I wouldn’t see any leaks. And guess what? No leaks! I felt like a pro. I let the water run for a few minutes to flush out any loose charcoal or air in the system. At first, the water came out a bit gray, but it cleared up pretty quickly.
The result
The result? The water tastes noticeably better. It’s hard to describe, but it just feels cleaner and fresher. I even did a little taste test with water from the tap before and after the filter, and the difference was clear as day.
Now, I’ve read that these carbon filters can get bacteria buildup if you don’t maintain them properly. So, I’m going to keep an eye on it. I think the key is to replace the cartridge on time and maybe do a little cleaning every now and then.
All in all, it was a bit of work, but I’m happy with the result. It’s nice to know that I’m drinking cleaner water. And hey, I learned a thing or two about plumbing along the way! If you’re thinking about getting one of these filters, I’d say go for it. Just be prepared to roll up your sleeves and get your hands a little dirty.
