Best price for pentek big blue 10 filter? We compare offers for you!

Okay, so, I’ve been having this water situation at my place, and I figured it was time to get a serious filter. I went with the Pentek Big Blue 10 filter. Let me tell you, it’s been a journey figuring this whole thing out.

First off, I started by looking into what kind of filter I actually needed. There are so many options, it’s kind of wild. I knew I wanted something that could handle the whole house, not just, like, the kitchen sink. I have well water which comes with its own set of challenges. I noticed that the water was leaving some residue and sometimes had a weird taste. So, I dug into it and found that sediment and iron were probably the main culprits.

After some more digging around, I decided to go with the Pentek Big Blue system. It seemed like a solid choice, and a lot of folks recommended it. Now, this thing is called “Big Blue” for a reason – it’s huge! I ordered a few different cartridges to try out. I got a carbon one (GAC-BB) for the general taste and odor issues. I have always used it because I like its taste very much. It is very suitable for me. I have been using it for three years and it has no problems. This time I just replace the filter element. And since iron is a problem, I also grabbed an iron reduction cartridge (RFFE10-BB) also. And, because why not, I added a sediment filter (RFC-BB) to the mix, just to catch all those little bits of who-knows-what floating around.

When everything arrived, it was time to get down to business. I shut off the main water line (super important, by the way, unless you want a surprise indoor pool). Then I got my tools and started taking apart the old, sad-looking filter housing I had. It was pretty gross, to be honest. I cleaned everything up as best as I could. There were also several sediment filters in the middle. I used a sediment filter (WP.5BB97P) this time, and I installed it. Then I looked at the instructions for the Big Blue – pretty straightforward, thankfully.

I put the new cartridges in, making sure they were seated right. It took a little wiggling, but eventually, everything was snug. I double-checked all the connections, tightened everything up, and then slowly turned the water back on. I was holding my breath, hoping I wouldn’t see any leaks. Success! No leaks.

• First Test: I ran the water for a few minutes to flush out the new filters.
• Second Check: I checked for leaks again – still good.
• Taste Test: I filled up a glass and took a sip. Much better!

Initial Thoughts

It’s been a few weeks now, and I have to say, I’m impressed. The water tastes way better, and I haven’t seen any of that weird residue. I’ll have to keep an eye on the pressure to see how quickly the filters clog up, but so far, so good. It will take about three months. I will share it again after three months. All in all, this Pentek Big Blue 10 filter setup seems like a winner. It was a bit of work to install, but totally worth it for clean, good-tasting water. I recommend it. This filter is really good. You should buy one and try it.