Big blue filter 20 inch: Which one is right for your home?

Okay, so I’ve been meaning to share this for a while. It’s about the time I installed a big blue filter, the 20-inch one.

First off, I gotta say, my tap water was tasting kinda funky. And with all the stuff you hear about in the news, I figured it was time to do something. I saw these big blue filters online, and they seemed like a good solution. They’re supposed to get rid of sediment and even some of the nastier stuff, like lead and those weird chemicals. Plus, they make the water taste better, which is a big win.

So, I ordered one. It wasn’t the cheapest thing, but way cheaper than some of those fancy systems. When it arrived, I was like, “Okay, let’s do this.” The box had these two big blue filter housings, a faucet, and a bunch of fittings.

Installation Process

• Gathering my tools: I got my toolbox and made sure I had everything I needed – a wrench, some Teflon tape, you know, the usual plumbing stuff.
• Turning off the water: This is important, folks. I went to the main water valve and shut it off. Don’t wanna make a mess, right?
• Finding a spot: I picked a spot under my sink where I could easily access the filters for changing them later.
• Mounting the housings: The kit came with brackets, so I used those to mount the filter housings to the wall under the sink. I made sure they were level and secure.
• Connecting the pipes: This was a bit tricky. I used the quick-connect fittings that came with the kit. I had to cut the existing cold water line and connect one end to the inlet of the first filter housing. Then, I connected the outlet of the first housing to the inlet of the second one. Finally, I connected the outlet of the second housing back to the cold water line. It is designed for sediment and other stuff for well or city water.
• Installing the faucet: I already had a hole in my sink for a filtered water faucet, so I just had to install the new one that came with the kit. If you don’t have a hole, you might need to drill one.
• Flushing the system: Once everything was connected, I slowly turned the water back on and checked for leaks. Then, I let the water run through the filters for a few minutes to flush out any loose stuff.

After I was done, I took a big gulp of water from the new faucet. And you know what? It tasted way better. No more weird aftertaste, just clean, fresh water. I gotta say, I was pretty proud of myself for pulling this off. Now, I don’t have to worry so much about what’s in my water. And the best part is, changing the filters is gonna be a breeze with those quick-connect fittings.

So, if you’re thinking about getting a water filter, I’d say go for it. It’s a worthwhile investment, especially if you’re dealing with not-so-great tap water. And if you’re even a little bit handy, you can totally install one of these big blue filters yourself. It is totally a big filter blue pre-filtration system for my home. It’s worth the effort, I promise.