Big Blue Triple Water Filter: Is it the Right Choice for Your Home (Simple Guide)

Alright, so the other day I finally got around to installing this big blue triple water filter at home. It’s something I’d been putting off for a while, but with all the gunk I’ve been seeing in our water, I knew it was time to tackle this project.

First off, I gathered all my tools and the filter system itself. This thing is pretty hefty, with three large, blue canisters – hence the name “big blue,” I guess. The idea is that each of these canisters holds a different type of filter cartridge, and together they work to remove all sorts of stuff from your water, like sediment, chlorine, and even things like fluoride. I made sure to pick up some cartridges that specifically mentioned fluoride removal, because that was one of my main concerns.

The first step was figuring out where to mount this beast. It’s designed to be installed on your main water line, so it filters all the water coming into your house. I picked a spot in my basement where the main line comes in, making sure there was enough space around it to easily change the filters later on.

I turned off the main water supply. This is crucial, folks – don’t forget this step unless you want a surprise shower.
Then I cut into the main line. I took a deep breath and made the cuts.
With the pipe cut, I started assembling the filter housing. It’s a pretty straightforward process. I just connected the inlet and outlet of the housing to the corresponding pipes, using plenty of Teflon tape to make sure there are no leaks.
Next up was inserting the filter cartridges into their respective canisters. Each one is labeled, so you know which order they go in. I popped them in, making sure they were seated correctly.
Once everything was assembled, it was time to mount the whole unit to the wall. I got out my level to make sure it was straight, then used some sturdy screws to secure it in place.

With the filter system mounted and everything connected, I slowly turned the water back on. I watched it closely, checking for any leaks or drips. Thankfully, everything looked good – no leaks!

The Result

After letting the water run for a few minutes to flush out the system, I poured myself a glass. Now, I might be imagining things, but the water tasted noticeably cleaner. I even did a little side-by-side comparison with water from another tap, and I swear the filtered water was clearer and had less of that chlorine smell. It’s pretty satisfying to see the results of your hard work, especially when it comes to something as important as your drinking water.

Overall, installing the big blue triple water filter was a bit of a project, but definitely manageable for a DIYer. It feels good to know that my family is now drinking cleaner, safer water. Plus, I saved a bunch of money by doing it myself instead of calling a plumber. If you’re thinking about improving your home’s water quality, I’d say this is a solid option to consider. Just be prepared to get your hands a little dirty – or should I say, wet!