Choosing a microprocessor dosing pump? Key features to consider

Today, I wanted to share my experience setting up a microprocessor dosing pump. I have to say, it was not as simple as I thought.

Getting Started

First off, I had to figure out what kind of pump I needed. I mean, there are so many types and it really depends on what you are using it for. After some digging, I started to understand the basics and what I needed for my hydroponic system.

Installation Process

Then came the installation. I started by mounting the pump on the wall. It wasn’t that hard. I drilled the holes, placed it, and plugged the tubes into the inlets. Then I filled my solution tank. I wanted to make sure everything was connected properly. Then, I plugged the pump into a power source, turned it on, and heard it working.

Setting It Up

Next, I had to program the dosing settings. This part took me a bit to get used to. I had to select a few variables and calibrate them, including the dose amount and the frequency. After a few tries, I think I got it dialed in.

Checking the Results

Finally, I monitored the system for a few days to see if it was working as expected. I checked the pH and nutrient levels in my solution regularly and made small adjustments to the dosing settings as needed. It seems to be working well now.

Final Thoughts

Setting up a microprocessor dosing pump was a new thing for me, and there was a learning curve. But with some patience and a bit of trial and error, I got it working. It is kind of cool to see it in action, automating a task that I used to do manually.

If any of you are thinking about setting up a dosing pump, I hope this helps. Feel free to ask any questions in the comments.