One stop supplier of water treatment parts&accessories
Need Reverse Osmosis Filter Membrane? Get Affordable Choice!
So, the water at my place started tasting kinda funky. I figured it was time to mess with the reverse osmosis filter, specifically that main membrane thingy. I’m no plumber, but I’m pretty handy, so I decided to tackle it myself.Reverse Osmosis Filter Membrane
Getting Started
First things first, I turned off the water supply to the whole system. You don’t want a surprise shower while you’re working, trust me. Then, I grabbed a bucket and some towels because, well, water is involved, and it’s gonna get a little messy.
Locating and Removing the Old Membrane
Next, I had to find the membrane housing. It’s usually this long, cylindrical container, kinda looks like a big white tube. Mine was tucked away under the sink, naturally. I unscrewed the cap on the housing, and there it was, the old, gunky membrane. I used some pliers to gently pull it out. It was pretty gross, all discolored and stuff. No wonder the water tasted weird.
Installing the New Membrane
Then, I took the new membrane out of its packaging. I made sure to handle it carefully, you don’t wanna damage the thing. I lubricated the O-rings with a little bit of silicone grease (I had some lying around, but you can get it at any hardware store). This helps it slide in easier and creates a good seal.
I gently pushed the new membrane into the housing, making sure it was seated properly. Then I screwed the cap back on, nice and tight, but not too crazy tight.
Flushing the System
After that, I turned the water supply back on, real slow at first, just to make sure there were no leaks. Once I was sure everything was good, I opened the faucet and let the water run for a good while. This flushes out any air or loose particles from the new membrane. It took a bit, maybe 20 minutes or so, but eventually the water started running clear and tasted fresh.
Done
All set, I had clean good water again.
- Turn off Water: The water supply should be off.
- Find The membrane Housing.
- Remove Old Stuff: Old membrane out.
- Install New: New one carefully in.
- Flush System: Run water.
And that’s all there is to it! It’s not rocket science, just a little bit of elbow grease and patience. Now my water tastes great, and I saved myself a plumber’s bill. Win-win!
