Above Ground Cartridge Pool Pump Filter: Top Picks for Easy Maintenance!

Alright, so, I’ve got this above-ground pool, right? And let me tell you, keeping that water clean was a real pain until I figured out the whole filter pump situation. I’m no pool expert, but I’m gonna share what I did, step-by-step, in case it helps anyone else out there.

First off, I had to get a cartridge filter pump. I mean, there are other types, but this is the one that worked for me. They have some good ones online. I just looked around until I found one that seemed like it would do the job for my pool size and didn’t break the bank.

Once the pump arrived, I had to set it up. Now, I’m not the handiest person, but it wasn’t too bad. I put it near the pool, but not too close, you know, for safety and all that. Then came the hoses. I connected one from the pool to the pump – that’s the one that sucks the water in. The other hose goes from the pump back to the pool, pushing the clean water out.

Here’s a little trick I learned: before you turn the pump on, make sure all the air is out of the system. There’s usually a little valve on the top of the filter to let the air escape. You’ll hear it hissing out. When water starts coming out, you close it up. It is a key step.

• Getting the pump: Looked around online, found one that fit my pool and budget.
• Setting it up: Placed it near the pool, hooked up the hoses – one in, one out.
• Bleeding the air: Opened the air valve, let the air out, closed it when water appeared.

After that, I just flipped the switch and turned the pump on. It started humming, and I could see the water flowing. At first, the water was a bit cloudy, but it cleared up pretty quickly. I was actually surprised how well it worked!

Now, the filter does need some love. After a while, it gets all gunked up, so you gotta clean it. I just take it out, hose it down really well, and pop it back in. It is simple work. Some people replace them, but I find cleaning works just fine.

I also learned that it’s a good idea to run the pump for a few hours every day. It keeps the water circulating and helps prevent algae and stuff from growing. It also helps distribute any chemicals you are using.

My Routine

• Run the pump: A few hours daily to keep things moving.
• Clean the filter: Hose it down when it gets dirty.
• Check the water: Make sure it looks and smells okay.

Honestly, getting this filter pump was a game-changer. My pool water is way cleaner now, and I don’t have to spend hours scooping out leaves and bugs. It’s not perfect, but it’s a heck of a lot better than before. Plus, I get to enjoy my pool more, which is the whole point, right?

So yeah, that’s my little story about my above-ground pool filter pump adventure. Hope it helps someone out there!