Big Blue 20 Inch Filter Reviews: Find Out if This Filter Is Worth Buying!

Okay, so, I’ve been messing around with this Big Blue 20-inch filter for a while now, and I figured I’d share my experience, especially since I had to figure a lot of this out on my own. It’s pretty straightforward once you get the hang of it, but getting there took some trial and error.

First off, I decided to get one of these things because, well, the water where I live isn’t exactly top-notch. I mean, it’s okay, but I wanted something better, especially for drinking and cooking. So, I started looking into water filters, and after some digging around, I landed on the Big Blue. The 20-inch model seemed like a good size—not too big, not too small.

The first thing I did was, obviously, buy the filter. Man, there are a lot of places to get these things, and the prices vary quite a bit. You really gotta shop around, look at reviews, and see if it fits your budget. After checking some reviews about the APEC Water Systems’ Big Blue Specialty Calcite Low pH Neutralizing Replacement Water Filter Cartridge, I found one that seemed like a good deal. It’s crucial to ensure you don’t overpay and that it’s worth what you’re spending.

Once I had the filter, the next step was installation. Now, I’m no plumber, but I’m pretty handy, so I thought, “How hard can it be?” Turns out, it’s not that hard, but you definitely need to pay attention to what you’re doing. I started by turning off the main water supply—very important unless you want a surprise shower. Then, I had to find a good spot to install the filter. I decided to put it in the basement, right where the main water line comes into the house.

I measured everything out, made sure I had all the right fittings, and got to work. Connecting the filter housing to the water line was probably the trickiest part. It’s all about getting a good seal so there are no leaks. I used some thread seal tape on the connections, which seemed to do the trick. Once everything was connected, I slowly turned the water back on and checked for leaks. Thankfully, there weren’t any!

Then came the waiting game. I ran the water for a good while to flush out the new filter. The water was a bit cloudy at first, but it cleared up after a few minutes. The difference in water quality was noticeable pretty quickly. It just tasted cleaner, you know? Like, I didn’t realize how much I was missing out on until I had this filter.

Maintenance

• Change it up: I’ve learned that you gotta change these filters out every 6 to 12 months, depending on your water quality and usage.
• Watch the pressure: Keep an eye on your water pressure. If it drops, your filter might be clogged and needs changing.
• Every 10 Years: According to the manufacturer, it’s a good idea to replace the housing unit itself every ten years. They’re built to last, but hey, everything has a lifespan.
• Micron Rating Matters: This filter is rated at 5 microns, meaning it grabs a lot of the gunk floating in the water. I found out that lower micron ratings clog up faster, so 5 is a good balance for keeping the water clean without needing constant changes.

All in all, setting up this Big Blue 20-inch filter was a bit of a project, but totally worth it. It’s made a big difference in my day-to-day, and I feel better knowing that my family and I are drinking cleaner water. If you’re on the fence about getting one, I’d say go for it. Just be prepared to roll up your sleeves a bit for the install!