Big Blue Filter Flow Rate: What You Need to Know for the Best Results!

Okay, so I’ve been messing around with this Big Blue water filter for a while now, and let me tell you, figuring out the flow rate was a bit of a head-scratcher at first. But I’ve got some stuff down that I think might help some of you folks out there.

First off, I grabbed this Big Blue filter because, well, I heard they were pretty good. They’re all big and sturdy, and I figured it would do a decent job for my well water. The water here isn’t terrible, but you know, it’s well water. It’s got its quirks.

Getting Started

So, I got the filter, and the first thing I did was try to figure out where to install it. I ended up putting it right after the pressure tank. I thought that made the most sense. Then came the fun part – hooking it all up. I’m no plumber, but I’m pretty handy. It took a bit of doing, but I got it all connected without too many leaks, thankfully.

The Flow Rate Puzzle

Now, the flow rate – that’s where things got interesting. See, I wanted to make sure the water pressure didn’t drop too much after going through the filter. I mean, who wants a weak shower, right? So, I started experimenting.

• I tried running the water in the kitchen sink first, just to see what would happen. The pressure seemed okay, but it wasn’t great.
• Then I had this idea – maybe if I used a separate faucet for drinking water, it would help. So, I set up a small faucet next to the sink, just for filtered water. This actually did reduce the flow rate through the carbon media.
• I also noticed that the size of the filter itself played a big role. I mean, it’s called “Big Blue” for a reason, right? These things are huge! And the bigger the filter, the more water it can handle without slowing down too much.

Figuring It Out

After a bunch of trial and error, I finally got it to a point where I was happy with the flow rate. The water pressure was good enough for showers and washing dishes, and the separate faucet for drinking water worked like a charm. It wasn’t perfect, but it was way better than before. I started thinking this was all a good choice.

One thing I learned is that it’s all about balance. You want a filter that’s big enough to handle your water usage, but you also don’t want it to be so big that it takes up your whole basement. And if you’re really concerned about the flow rate, that separate faucet trick might just be the way to go.

So, that’s my story about messing with the Big Blue filter and its flow rate. It was a bit of a journey, but I learned a lot along the way. Hope this helps some of you out there who are thinking about getting one of these bad boys. It’s worth the hassle, trust me. Clean water is a good thing.