Big Blue Iron Filter Installation: Easy Step-by-Step Process

Okay, here’s my experience with the Big Blue Iron Filter:

So, I noticed my water was starting to taste a bit off, kind of metallic. And the worst part? My white laundry started to get these nasty rust-colored stains. It was seriously driving me nuts! After doing a little digging around, I figured it was probably iron in my water. That’s when I decided to take the plunge and get a Big Blue Iron Filter.

First things first, I had to find a good spot to install this thing. I went to my basement and followed the main water line. Then I found a perfect place for the filter and it wasn’t too cramped, so that was a plus. The filter housing had these “IN” and “OUT” markings on the top, making it pretty clear which way the water needed to flow.

Next, I grabbed my tools and started to install the whole thing. I used some Teflon tape, wrapping it around the pipe threads of the fittings. I think I did about three rounds, just to be safe. Then, I screwed the mounting bracket onto the wall, making sure it was good and sturdy. After that, I used the provided screws to mount the housing to the bracket.

Now for the filter itself. I took the sump off of the housing and unwrapped the new filter. There was this little notch at the bottom of the sump that helped center the filter perfectly inside. Kinda neat, huh? I placed the filter in the sump, then I screwed the sump back onto the housing, making sure not to overtighten it.

With everything hooked up, I slowly turned the water back on, keeping an eye out for any leaks. Luckily, I didn’t see a drop! I let the water run for a few minutes, just to flush out any air or loose stuff from the new filter.

And you know what? It’s been a few weeks now, and the difference is night and day! My water tastes clean and fresh again, no more metallic aftertaste. And the best part? My laundry is back to being bright white! No more of those annoying stains.

Honestly, installing this Big Blue Iron Filter was way easier than I expected. If you’re dealing with iron in your water, I definitely recommend giving it a shot. It’s a total game-changer!

• Find a good spot for installation
• Use Teflon tape on fittings
• Mount the bracket and housing
• Install the filter in the sump
• Turn the water back on slowly
• Enjoy clean, iron-free water!

That’s all. Hope this helps someone out there!