One stop supplier of water treatment parts&accessories
Big Blue Sediment Filter Housing: Does It Really Work, And How to Choose the Right One Easily
Okay, folks, let’s talk about my recent adventure with a big blue sediment filter housing.
It all started when I noticed the water pressure in my house was getting weaker and weaker. At first, I thought it might be the plumbing, but then I remembered the whole-house water filter I installed a while back. That’s when I figured, maybe it’s time to check the filter.
So, I grabbed my tools and headed to the basement where the filter housing is located. This thing is big and blue, hence the name “big blue.” It’s supposed to catch all the sediment and gunk before the water gets to the rest of the house.
First thing I did was turn off the water supply to the filter. This is super important, unless you want a surprise shower. Then, I found the pressure release button on top of the housing and pressed it to let out any built-up pressure. Next up was unscrewing the housing. It’s a bit of a workout because it’s large and can be pretty tight. I used a strap wrench to get a good grip and finally got it loose.
- Turned off the water supply.
- Pressed the pressure release button.
- Unscrewed the filter housing.
- Took out the old filter.
- Put in a new filter.
- Screwed the housing back on.
- Turned on the water supply.
- Checked for leaks.
Steps I took to make it happen:
Once I got the housing off, I took out the old filter. Man, was it dirty! It was full of sediment and looked pretty nasty. No wonder the water pressure was so low. I popped in a brand new filter, making sure it was the right size and type.
Then came the part of putting the housing back on. I had to make sure the O-ring was in place and lubricated, to create a good seal and prevent leaks. I screwed the housing back on, not too tight, just snug.
After that, I slowly turned the water supply back on, keeping an eye out for any leaks. Luckily, there were none! I also pressed the pressure release button again to let out any trapped air. Finally, I checked the water pressure in the house, and it was back to normal! Success!
So, that’s my story about dealing with a big blue sediment filter housing. It’s not the most exciting task, but it’s important to keep your water filter clean for good water quality and pressure. Hope this helps anyone out there facing a similar situation!
