How long does an 80 gpd ro membrane last? Find out from the experts!

Today I messed around with this 80 gpd RO membrane thing. Let me tell you, it was quite the adventure.

So, I started off by gathering all the stuff I needed. Got my tools, the new 80 gpd RO membrane, and some other bits and bobs. It was like a little treasure hunt, making sure I had everything before kicking things off.

First things first, I turned off the water supply to the system. Safety first, you know? Then, I opened up the housing where the old membrane was chilling. Took out that old membrane, which looked like it had seen better days.

Next, I gave the inside of the housing a good scrub. I used some warm water and a soft cloth to clean everything up. You wouldn’t believe the gunk that had built up in there! After a bit of elbow grease, it was sparkling clean.

Then came the fun part – putting in the new 80 gpd RO membrane. I carefully inserted it into the housing, making sure it was snug as a bug. I didn’t want any leaks or anything messing up my hard work.

Once the new membrane was in place, I put the housing back together and tightened everything up. Then, I slowly turned the water supply back on, keeping my fingers crossed that I did everything right.

I let the system run for a few minutes, just to flush out any air or loose stuff. Then I checked for leaks. Good news – not a single drop! I was pretty proud of myself at this point.

After the flushing, I tested the water quality. And guess what? It was crystal clear and tasted great. Success! My new 80 gpd RO membrane was doing its job like a champ.

Maintenance

• Pre-filters and sediment filters, change these guys out every 6 to 12 months.
• Carbon filters, those also need a swap every 6 to 12 months.
• But the RO membrane itself? That thing can last a good 2 to 5 years, though I usually replace it around the 24-month mark just to be safe.

All in all, it was a successful day of DIY-ing. I saved myself some money by doing it myself, and I learned a thing or two along the way. If you’re thinking about doing the same, go for it! It’s not as hard as it looks, and it’s pretty satisfying to see the results of your own handiwork. It seems that changing an RO membrane is not a tough job. Just be careful and follow the steps, you can easily get it done. Feel free to leave comments if you have any questions!