Need a Big Blue Pentair Filter? Learn How to Choose the Best Model to Suit Your Specific Needs

Okay, here’s my experience with the Big Blue Pentair filter.

So, I’ve been dealing with some pretty nasty water at my place. I finally got so sick of water problems that I decided to pull out the big guns. This time I thought it was time to install a whole house water filter. After a bunch of research, I went with the Big Blue Pentair filter. It looked heavy-duty, and the reviews were good, so I figured, why not?

Getting Started

First thing I did was try to find the user manual and it showed my existing filter size. So I started preparing for the filter.

The Installation Process

I started by turning off the main water supply to the house. Safety first, you know? Then, I found a good spot on the main water line, after the pressure tank, to install the filter housing. I used some pipe cutters to cut out a section of the pipe, making sure to measure it so the housing would fit snugly.

Next, I installed the mounting bracket that came with the filter. I drilled some holes and screwed it into a stud to make sure it was secure. It has to hold a lot of weight after I install it, and the water will fill it up. Then, I attached the filter housing to the bracket, making sure it was level. I connected the inlet and outlet ports of the housing to the main water line using some threaded fittings and Teflon tape. I wrapped the threads with Teflon tape a few times to prevent leaks, then tightened everything up with a wrench. It was a bit of a workout, but I managed.

After that, I installed the pressure gauges on the inlet and outlet ports. This was pretty simple, just screwing them in with a little more Teflon tape. These gauges are going to be my best friends, telling me when the filter needs changing.

Putting in the Filter

Now, the most important part. I opened up the filter housing and took out the old filter. Man, it was huge and looked pretty gross. I grabbed the new Pentair Pentek NCP-20BB Big Blue Carbon Sediment filter cartridge. It is designed to remove impurities and contaminants from the water supply. It promised to deal with sediment, chemicals, and even heavy metals, and the information on the tank labeled the name of the manufacturer, model name, and the various sizes of the filter in that line of models. I popped it into the housing, making sure it was seated properly.

With the filter in place, I carefully closed the housing, making sure the O-ring was in place to prevent leaks. Then, I slowly turned the water back on, checking for any leaks or drips. I tightened any fittings that needed it until everything was water-tight. I didn’t want to wait until disaster strikes.

The Results

Once the water was back on and the system was leak-free, I turned on a few taps to let the water run through the new filter. At first, the water was a bit cloudy, but it cleared up pretty quickly. I ran it for a good 10 minutes to flush out any air and loose carbon particles.

The difference was amazing. The water tasted so much better, and the chlorine smell was completely gone. Even the water pressure seemed better, which was a nice bonus. I also noticed that the showerheads and faucets weren’t getting clogged with sediment anymore. It’s like a whole new world of water in my house!

I checked the pressure gauges, and they were reading normal. I made a note to check them regularly. According to the manufacturer, Pentair, these filters should last about 10 years, depending on water quality and usage. But I’ll be keeping an eye on those gauges to know for sure.

Final Thoughts

Honestly, installing the Big Blue Pentair filter was a bit of work, but it was totally worth it. It has the versatility to meet all of your large-capacity filtration needs, including high-flow and heavy-sediment applications. If you’re dealing with bad water, I highly recommend giving this filter a try. It’s made a huge difference for me, and I’m pretty sure it’ll do the same for you. Just make sure you’ve got the right tools and are comfortable with a bit of plumbing work. Happy filtering!