Need a brs ro membrane? Heres where to buy it!

Today I want to talk about my experience with setting up a reverse osmosis membrane, the BRS RO membrane to be exact. It all started when I noticed my tap water wasn’t tasting quite right. It had this weird aftertaste and I was starting to worry about what might be in it. So, I did some digging online and found out about reverse osmosis systems. Apparently, they are pretty good at cleaning up tap water by removing all sorts of nasty stuff like chemicals and whatnot.

After reading a bunch of reviews, I decided to go with a BRS 4 Stage RO system. I’m no expert on water filtration, but it seemed like a popular choice, and the price was right. So, I ordered the system online, and a few days later, it arrived at my door.

Unboxing and Setup

The box was packed with all sorts of things: filters, tubes, a membrane housing, and of course, the RO membrane itself. I’m not the handiest person, but I figured I could manage. I started by laying out all the parts and reading through the instructions.

First, I grabbed the sediment filter and the carbon filter. Apparently, these are the first line of defense, taking out the bigger particles and some of the chlorine. The instructions said to change these every six months or so, so I made a mental note of that.

Installing the Membrane

Next up was the RO membrane. This was the main event, the thing that does the heavy lifting in terms of water purification. The membrane was made by DOW Filmtec, which I read was a reputable brand. It was rated for 75 gallons per day, which seemed like more than enough for my needs.

The membrane came in a sealed pouch. I carefully opened it and slid the membrane into its housing, making sure it was snug and secure. I connected the tubes according to the diagram in the instructions, one for the incoming tap water and another for the outgoing purified water. Then there is a tube for the waste water.

Flushing the System

Once everything was hooked up, I turned on the tap and let the water flow through the system. The instructions said to let it run for a few hours to flush out any manufacturing residue. I had some work to do, so I just let it do its thing while I was busy.

Tasting the Difference

After a few hours, I filled up a glass with the filtered water and took a sip. To be honest, I was pretty amazed. The weird aftertaste was gone, and the water tasted clean and pure. It was like night and day compared to my regular tap water.

Maintenance

I know that I’ll need to replace the membrane eventually. From what I’ve read, it’s recommended to change them every three years or so. I found a place online that sells replacement membranes for a decent price, around $60, so that’s something to keep in mind for the future.

Overall, I’m really happy with my BRS RO membrane. It was pretty easy to set up, and it’s made a big difference in the quality of my drinking water. If you’re thinking about getting an RO system, I’d definitely recommend giving it a try. It’s worth it for the peace of mind knowing that you’re drinking clean, pure water.