Need Clean Water? Why a Big Blue 10 Inch Water Filter Is a Great Choice!

Alright, folks, let’s talk about my little adventure with the Big Blue 10-inch water filter. I’ve been meaning to improve the water quality at my place for a while now, and after some digging around, I decided to give this thing a shot.

First off, I started by identifying my needs. I live in an area with hard water, and I’ve noticed some weird tastes and smells recently. Plus, I’ve got a family, so I wanted something that could handle our daily water usage without any hiccups. That’s when I came across the Big Blue filters. They seemed to be a popular choice for handling large volumes of water, perfect for a household like mine.

So, I ordered the 10-inch version. I heard that the 10-inch one is pretty good for smaller homes, while the 20-inch is more for larger places. I thought, “10 inches should be plenty for us.” Plus, it seemed a bit easier to handle and install.

When the package arrived, I was eager to get started. It was a pretty straightforward setup, I must say. I had already chosen where to install it, in the main water line coming into my house. This way, all the water, whether it’s for the kitchen, bathroom, or laundry, gets filtered.

• Gathered my tools: a pipe cutter, some wrenches, Teflon tape, and the filter housing itself.
• Turned off the main water supply to my house—this is crucial, folks, unless you want an indoor swimming pool.
• Cut into the main water line where I wanted to install the filter.
• Used some Teflon tape on the threads to ensure a good seal, then connected the filter housing to the pipes.
• Mounted the housing securely on the wall.

Once everything was connected and tightened, I slowly turned the water back on, keeping an eye out for any leaks. Thankfully, there were none! I let the water run for a few minutes to flush out any air and debris from the installation.

My Observations

Right away, I noticed a difference. The water tasted cleaner, and the weird chlorine smell was gone. It felt softer, too, which was a nice bonus. I also checked the water pressure, and it seemed unaffected by the filter, which was a relief.

I’ve been using the Big Blue 10-inch filter for a few months now, and I’m pretty happy with it. It does what it’s supposed to do, and I haven’t had any issues with it so far. I did some research and found out that the filter is supposed to remove organic pollutants, industrial chemicals, and even some microbial stuff. That’s reassuring, especially since we drink a lot of water at home.

Maintenance seems pretty easy. I just need to replace the filter cartridge every few months, depending on our water usage and the quality of the incoming water. I’ve already ordered a replacement cartridge, just to be prepared.

In the end, setting up the Big Blue 10-inch water filter was a good move. It wasn’t too difficult to install, and it’s been doing a great job of improving our water quality. If you’re thinking about getting one, I’d say go for it. Just make sure you get the right size for your needs and follow the installation instructions carefully. You’ll be enjoying cleaner, better-tasting water in no time!