One stop supplier of water treatment parts&accessories
Upgrading your water filter: Why a 150 gpd ro membrane is worth it.
Okay, so, I’ve been messing around with my water filter setup at home, and I wanted to share my experience with upgrading to a 150 GPD RO membrane. I figured it might be useful to someone out there, cause frankly, finding straightforward info on this stuff ain’t easy.
I started with a standard 50 GPD RO system, the kind most folks have for home use. It was doing the job, but I felt like it was a bit slow. So, I thought, why not try bumping it up? I saw this 150 GPD membrane online, and the idea of getting more filtered water quicker seemed pretty sweet.
Getting the new membrane was the easy part. It’s just a cylinder thingy that fits inside the filter housing. I made sure to get one that was compatible with my system, that’s important, you know. Didn’t want to end up with something that wouldn’t fit.
The real fun, or should I say challenge, was swapping it out. First, I turned off the water supply to the system, gotta make sure you don’t flood your kitchen. Then, I located the housing where the old membrane was. It was a bit of a squeeze, but I managed to unscrew it.
Taking the old membrane out was kind of like pulling out a really long, wet sock. You just gotta grab it and pull. Then, sliding the new 150 GPD one in was the reverse. I pushed it in until it was snug, then screwed the housing back on. Not rocket science, but you do need a bit of elbow grease.
- Turn off water supply.
- Unscrew membrane housing.
- Pull out old membrane.
- Push in new membrane.
- Screw housing back on.
- Turn water supply back on.
After I turned the water back on, I let it run for a few minutes, just to flush out any air or loose stuff in the new membrane. And I gotta say, the water flow was noticeably faster. It was filling up my pitcher much quicker than before.
Now, was it worth the hassle? I’d say yeah. If you’re using a lot of filtered water, like for drinking, cooking, and maybe even for your plants or pets, that extra speed can be a real time-saver. But if you’re just using it occasionally, the standard 50 GPD might be all you need.
But let me tell you, it’s not just about speed. I feel like the water tastes a bit better too, but maybe that’s just me. One thing’s for sure though, this little upgrade made a difference in my daily water routine. No more waiting around forever for the pitcher to fill up. And, you know, there’s a certain satisfaction in doing these little DIY upgrades yourself. Makes you feel like you’ve really got a handle on your home setup.
Final Thoughts
So there you have it, my little adventure with a 150 GPD RO membrane. It’s not a huge change, but it’s definitely an improvement in my book. If you’re thinking about doing it, I’d say go for it. Just make sure you get the right size membrane and you’re comfortable with a little bit of plumbing work. It’s a pretty simple upgrade that can make your daily water routine a bit smoother. I hope this was useful for you.
