Need a Big Blue 3 Stage Water Filter? (Here is What You Should Know Before Buying One)

So, I’ve been wanting to do something about the water quality in my house for a while now. After doing some digging around, I decided to go with a 3-stage big blue water filter system. I figured it’d be a good way to tackle the chlorine, sediment, and other gunk in my water supply.

First off, I went ahead and ordered the filter system online. I chose a well-reviewed brand called Kind Water, nothing too fancy, just something that seemed reliable and got the job done. Once the package arrived, I got to work.

I started by figuring out where I wanted to install the filter. I chose a spot in my basement near the main water line, which seemed like the most practical location. I made sure to turn off the water supply to the house before I did anything else—wouldn’t want any surprise leaks!

Next, I grabbed my tools and got down to the actual installation. I mounted the filter housing brackets to the wall, making sure they were secure and level. It was a bit of a tight squeeze, but I managed. Then, I connected the filter housings to the brackets and started working on the plumbing.

I cut into the main water line and installed the inlet and outlet valves for the filter system. This part was a little tricky, but I double-checked all the connections to make sure there were no leaks. I used some Teflon tape on the threads to ensure a good seal.

Once the plumbing was sorted out, I flushed the filters according to the manufacturer’s instructions. This involved running water through each filter for a few minutes to remove any loose carbon or sediment. I made sure to check for leaks during this process, just to be safe.

After everything was set up and flushed, I turned the water supply back on and tested the system. I ran the water through the faucets in my house and checked the water pressure and flow. Everything seemed to be working fine, which was a relief.

• Stage 1: This one’s a sediment filter. It’s meant to catch all the dirt, rust, and other particles floating around in the water.
• Stage 2: Next up is a carbon filter. This bad boy takes care of the chlorine, bad tastes, and odors. It’s also supposed to tackle some heavy metals, which is a bonus.
• Stage 3: The last one is another carbon block filter for removing up to 99% of chlorine, also, it can help filter out the organic and inorganic compounds.

Since installing the filter, I’ve definitely noticed an improvement in the water quality. The water tastes cleaner, and I don’t have to worry about that chlorine smell anymore. Plus, it’s nice knowing that my appliances are being protected from sediment buildup.

Overall, installing the big blue 3-stage water filter was a bit of a project, but it was totally worth it. My family and I can now enjoy cleaner, safer water throughout the house. If you’re thinking about upgrading your home’s water filtration, I’d say go for it! It’s a small investment that makes a big difference.